DESIGN / FULL OVERLAY CABINET

Wall Cabinet Designer Parametric / mm

Create a wall cabinet carcass with evenly spaced shelves and optional full overlay doors.

Unsaved Design

Save your parameters to return later.

Loading interactive 3D preview…

GROUPED PART TYPES / REAL PHYSICAL PANELS

Panel Cut List

7 physical panels

Grouped panels in millimeters
Name	Width	Height	Qty	Thickness
Left Side	320	720	1	18 mm
Right Side	320	720	1	18 mm
Top	764	320	1	18 mm
Bottom	764	320	1	18 mm
Shelf	764	320	1	18 mm
Door	397	716	2	18 mm

Export Units

Export details

SVG and DXF contain unoptimized physical panel drawings. DXF R2000 declares millimeters or inches and includes a fitted modelspace view. Set sheet size, margin and kerf in the optimizer.

Production

More Outputs

CSV / Print Units

Panel Drawings

Unoptimized / vector

Individual panel outlines at their true aspect ratio. These drawings are not an optimized sheet layout.

Left Side320 × 720 mm

Right Side320 × 720 mm

Top764 × 320 mm

Bottom764 × 320 mm

Shelf 1764 × 320 mm

Left Door397 × 716 mm

Right Door397 × 716 mm

No back panel, hinges, drilling or edge band allowance. No toolpaths.

Need a simple open carcass? Cabinet / Bookshelf Designer →

Plan a carcass with optional overlay doors

Carcass and shelf geometry

Sides run full height; top, bottom and shelves fit between them. Equal clear openings use the same cabinet algorithm. There is no back panel. Carcass depth describes the carcass; closed doors occupy additional thickness forward.

Reveal and center gap

Outer reveal R is clearance around the outside front edges. One door is (W − 2R) × (H − 2R). Two doors are each (W − 2R − center gap) ÷ 2 wide and H − 2R high. Center gap is ignored for one door; dimensions are not rounded to whole millimeters.

A default door check

At 800 × 720 × 320 mm, T18, one shelf, two doors, 2 mm reveal and 2 mm gap, each door is 397 × 716 mm and the model contains seven physical panels. Door thickness may differ from carcass thickness; optimize unlike material groups separately. This is panel sizing, without hinges, drilling or handle holes.