PANEL PRODUCTION CALCULATOR
Edge Banding Calculator
Calculate panel edge length in millimeters or inches using your optional price.
Panel and Band Inputs
Calculated Edge Length
Edge Length Per Part: 0 mm
Total Edge Length: 0 mm
Meters: 0 m
Feet: 0 ft
Enter your optional price to estimate cost.
No hidden wastage allowance, tax or markup. No currency conversion.
Open Sheet OptimizerEdge Length = Selected Edges × Quantity
Top and Bottom each use part width. Left and Right each use part height. Add the selected edge lengths for one rectangular panel, then multiply by quantity. Sheet placement or rotation does not change the required band length.
One meter is exactly 1000 mm; one foot is exactly 304.8 mm. Pricing can use meters or feet independently of your display units. There is no hidden wastage allowance or exchange-rate conversion.
Calculate only the edges you select
Selected sides and quantity
For 24 × 14-inch parts, Top + Bottom requires 48 inches per piece. At quantity four, total is 192 inches = 16 ft. For 600 × 350 mm parts with the same selection and quantity, total is 4.8 m.
Your price is optional
A price per meter or foot can be entered independently of geometry display units. Blank prices stay unpriced. There is no hidden allowance or exchange-rate conversion; generic Top/Bottom/Left/Right do not imply a furniture front.