DESIGN / OPEN-TOP DRAWER

Drawer Box Designer Parametric / mm

Create a simple open-top drawer box, calculate every panel and send it directly to sheet optimization.

Unsaved Design

Save your parameters to return later.

Loading interactive 3D preview…

GROUPED PART TYPES / REAL PHYSICAL PANELS

Panel Cut List

5 physical panels

Grouped panels in millimeters
Name	Width	Height	Qty	Thickness
Left Side	500	180	1	18 mm
Right Side	500	180	1	18 mm
Front	564	180	1	18 mm
Back	564	180	1	18 mm
Bottom	564	464	1	18 mm

Export Units

Export details

SVG and DXF contain unoptimized physical panel drawings. DXF R2000 declares millimeters or inches and includes a fitted modelspace view. Set sheet size, margin and kerf in the optimizer.

Production

More Outputs

CSV / Print Units

Panel Drawings

Unoptimized / vector

Individual panel outlines at their true aspect ratio. These drawings are not an optimized sheet layout.

Left Side500 × 180 mm

Right Side500 × 180 mm

Front564 × 180 mm

Back564 × 180 mm

Bottom564 × 464 mm

No decorative front, slides, grooves or hardware. No toolpaths.

Need an outer cabinet? Cabinet / Bookshelf Designer →

Size an open-top five-panel drawer box

One butt-joint construction

Left and right sides run full depth. Front and back fit between them; the bottom fits within all four walls. With outside W/H/D and thickness T, sides are D × H, front/back are (W − 2T) × H, and bottom is (W − 2T) × (D − 2T).

Clear interior and a worked example

Clear interior is W − 2T, H − T and D − 2T. Inside mode converts those values back to outside dimensions before using the same generator. At 600 × 180 × 500 mm, T18, sides are 500 × 180, front/back 564 × 180 and bottom 564 × 464 mm.

Before making a drawer

Use the 3D/exploded preview to inspect panel placement. This tool sizes the drawer box, not an outer cabinet or drawer-slide clearances. It adds no decorative front, runners, grooves or hardware. Save a revision, export panel outlines or transfer all five panels to the sheet optimizer.